Mountings for the body.

Pepairing the body to frame mounts front bolts. Firstly what you need is to purchase 2 well ute centre frame mounts. These have to be grafted to make one, then they must be extended at each end so they can be welded to the filler panel above the sill.
The rear frame mount and the centre frame mount require no modification they will work as per factory these mounting points are the same on the one ton ute and the well back ute.
The photo below shows the newly made body mount in position. Always allow at lease 50% overlape and if required stager your cuts.



The tray mounting brackets on the one ton ute frame must be remounted to the rear of the frame , this will allow room for the load board to clear the body mounting support.


The well back ute frame supports
below photo.
lovingly removed by Greg
Classic OZ wreck.
Need hard to find parts call Greg
ON 02 49598999.